image of a homeowner replacing an hvac air filter to improve indoor air quality

Indoor air might look like it’s fresh and clean, but, if you look closely, it may have tiny particles mixed in with it. You might’ve noticed this in direct sunlight. These particulates are only micrometers in size, so they can go inside narrow entrances easily. We breathe these particles without noticing, and they go deep into our lungs. Unfortunately, these pollutants can cause your health to deteriorate.

The HVAC air filters in your heating and air conditioning system can help improve your indoor air quality. These air filters block the particulate matter from entering your home and the air that you breathe. However, they might not work as they should. This article will discuss the different reasons your HVAC filter is not improving your indoor air quality.

7 Reasons Your Filter Isn’t Improving Your Indoor Air Quality

Your home’s HVAC filter might be underperforming due to the following:

1. No HVAC Filter

image of an hvac air filter

Did you recently move? If so, the HVAC system is most likely in tiptop shape, and all the parts are accounted for. However, you might also have noted that there are excess dust and other particulates in the air. Check if the filters are in place in the HVAC unit. The previous homeowner might have forgotten to put the filter in. Without a filter, the contaminants pass through easily. This will lead to a lot of dust and dirt accumulation in your system’s coils, ducts, blowers, and home.

2. Incorrect HVAC Filter Installation

Having an HVAC filter alone is not enough to improve your indoor air quality if it is not installed correctly. Consequently, your high-quality air filter will not work as effectively. A small opening is enough for the particulates to go around the air filter. Therefore, despite having an air filter in place, the indoor air quality will still suffer. You can replace it as per the manufacturer’s recommendation. However, your home’s air quality will not improve unless you do something about installing the air filter properly. Contact your trusted HVAC technician to help you fix this issue.

3. Insufficient HVAC Unit Runtime

image of a gas furnace

Filters are static installations. Therefore, air needs to flow from one side to the other for it to work as it should. The HVAC system needs to have enough runtime to force an adequate amount of air through the filters.

An HVAC system that is too large can short cycle. This means that it reaches the set temperature quicker, so the system switches off immediately. The HVAC system does not run long enough for the filter to do its job correctly. Ensure that a professional HVAC technician installs the correct HVAC size for your home. Check the fan settings of your thermostat as well. Make sure that it is “ON” instead of “AUTO” so that it runs longer. If you are not satisfied with this, try a standalone air filter. Discuss your issues with an expert so you can further improve your indoor air quality.

4. Insufficient HVAC Airflow

Sometimes, your HVAC runs sufficiently, but there isn’t enough airflow. As a result, the filtration volume decreases. This issue is usually caused by undersized return ducts and dirty air filters. The latter happens when homeowners do not subscribe to a regular HVAC filter replacement schedule. Air cannot pass through easily if the filter is clogged. When this happens, airflow will decrease and air pressure will increase. System efficiency will also be affected negatively. Make sure to change the filters frequently so that it can do its job properly.

5. Low MERV Rating

The Minimum Efficiency Reporting Value, or MERV, is the filter’s ability to capture particles. The higher the rating, the better it can trap certain types of particles. Therefore, you must pay attention to what MERV rating your filter has. Those with low ratings might be cheaper, but it also means that they are not as effective as those with higher MERV ratings. Consider this the next time you are buying filters. It is worth investing in filters with high ratings if it means you and your family breathe cleaner air when indoors.

6. Failure To Filter Outdoor Air For Mechanical Ventilation

HVAC systems will only work at its best if they are installed correctly. It won’t matter if you have a good HVAC brand if the installers make an installation mistake. For instance, the outdoor air duct might have been connected to the system’s return side. This bypasses the air filter. This mistake does not happen often, but it doesn’t mean it can’t happen to you. A highly trained and experienced technician can fix this problem immediately.

7. Incorrect Filter Placement

It is essential to know how your HVAC unit works and how the air flows. This way, you can determine the correct place to put your air filter. Incorrect or sub-optimal filter placement will lead to poor performance. This might seem like a little thing, but even the best HVAC make and model can underperform when it is in the wrong location.

Conclusion

The air filter is essential in achieving high indoor air quality. If you notice frequent respiratory issues like coughs and sneezes in your family, you might want to look into the air filter of your HVAC unit. It might have one or more of the problems listed above. Prevent any issues by hiring a reliable HVAC contractor to assist you. Make sure that your system receives regular checks and maintenance as well so that you breathe in clean indoor air at all times.

Contact Tower Energy For Your Heating & Cooling Needs

Tower Energy Logo
Tower Energy provides excellent HVAC services throughout Hartford County, Connecticut. We hire professionally certified and highly trained technicians who provide superior heating and cooling services, including repairs, tune-ups, installations, and replacements. All our techs are equipped with the proper skills, tools, experience, and knowledge to conduct accurate and prompt HVAC services.

Our company guarantees affordable cooling and heating service prices in the area. Our maintenance services will help increase your home’s comfort and energy-efficiency, as well as reduce your monthly cooling bills. If you need to replace or repair your current system, we can help you find the best make and model that will best fit your home and budget. All our services are backed with a guarantee. Your satisfaction is our priority. Schedule a service appointment and call Tower Energy today. We offer free, in-home consultations.

Contact us now or call us at (860) 677-7347 to find out more.

couple experiencing a cold spot in their house

Everyone wants to live in a comfortable home. A very large part of the comfort that people know and expect comes from the ability to maintain even indoor temperatures. The temperature of any single room shouldn’t vary significantly from the rooms and spaces around it. When dealing with hot and cold spots in house, however, discomfort and unease ensue.

The good news is that central HVAC systems are capable of providing stable and balanced temperatures throughout all of the rooms in a building. When HVAC systems aren’t able to accomplish this, many people are eager to find out why and resolve the problem.

Does your home have unpleasant hot and cold spots? Following is a quick look at what hot and cold spots are, and the factors that are responsible for them. We’ll also share a few tips on regulating the temperature of your home.

What Causes Hot And Cold Spots In Your Home?

Several issues can be responsible for hot and cold spots. Understanding the cause of these problems can help you determine the underlying cause and the best ways to eliminate hot and cold spots. The following are a few common causes of indoor air balancing issues and their associated solutions.

The Layout And Construction Of Your Home

If the overall design for your home makes proper airflow difficult, certain areas will be more likely to have warm spots. Likewise, certain areas will be more prone to feeling cool. It might be that your home isn’t zoned, which can help quite a bit in keeping temperatures consistent and even throughout specific areas.

When you create zones, you get far better control over indoor temperatures. You can raise or lower temperatures in select zones independently, which is a very effective way to meet everyone’s comfort needs.

image of hvac ductwork

The Installation Of Your HVAC Ductwork

Ductwork plays a major factor in determining how well your home can be heated or cooled. There are two cases in which ductwork can be blamed for cold and hot spots throughout the building:

In each of these cases, homes are usually older, and thus, their ducts might not have the ability to meet the demands of new HVAC technologies. Also, they may not be energy-efficient.

Restricted Airflow Or HVAC Air Vents That Are Blocked

If you’re looking for ways to balance out the heat in your multi-story home, you certainly aren’t alone. Even if your home HVAC system is high-performing and highly efficient, you’ll still have uneven temperatures throughout the hours if the airflow is restricted or if any air vents have been blocked. Anything keeping warm or cool air from flowing smoothly will result in areas that feel cooler or warmer than they ought to.

image of an hvac air vent that is closed

Gains In Solar Heat

Although you might diligently and regularly maintain your home heating and cooling system, you can still have hot and cold spots throughout the building as the result of solar heat. Solar heat gain occurs in spaces that get ample amounts of sunlight. Homes that have old, low-efficiency windows or windows that are damaged tend to let considerable amounts of heat and light in. As a result, solar heat gain has an impact on the HVAC system’s ability to keep the space at a comfortable temperature.

The Thermostat Is Located In The Wrong Area

If you have a thermostat installed in an area that receives direct sunlight, the sun’s heat is going to affect this unit’s ability to read temperatures correctly. Due to this fact, the thermostat will adjust temperatures incorrectly. This is also true for thermostats that are installed in drafty areas or that are routinely exposed to heat from lamps or other heat sources.

image of a thermostat in a poor location

Issues With Air Leaks

Air leaks are known for causing hot and cold spots throughout buildings. Holes, cracks, gaps, and issues at ceilings and walls can let the indoor air outside, which can result in dramatic changes in room temperatures.

Improperly Sized HVAC Equipment

The sizing of your HVAC system refers to its ability to heat or cool your living space according to size. If an HVAC system is improperly sized for the environment, this means that it is too large or small to do its job. In either case, extreme inefficiency will result. Moreover, you will likely have problems with lower indoor air quality, short cycling, increased humidity, and uneven temperatures throughout the home.

How To Get Rid Of Hot And Cold Spots

The good news is that hot and cold spots aren’t an irreparable issue. More importantly, many remedies are both low in cost and easy to use. Following are several simple solutions that you can use.

Check To See Whether The Vents Are Blocked

Check air vents in all rooms throughout your home. Verify that there aren’t any obstructions over or in front of them. Solid items such as plants and furniture can impact the airflow and will keep cooled or warmed air from being properly distributed by the system. This is also the case when the vents are closed. Keep all of your HVAC vents open. Relocate, remove, or simply reposition items to ensure free airflow.

image of a person sealing the window and preventing air drafts

Check For Drafts

Homeowners wind up spending hundreds of extra dollars in energy each year as the result of drafts. Cracks, holes, and gaps throughout the home allow inside air to seep out, which wreaks havoc on the HVAC system. Look around for drafts in windows, doors, and joints, and then have these things repaired.

Consider Your Insulation

If you have outdated insulation or a fairly old home, think about scheduling an inspection to find out whether either of these factors is creating fluctuations in temperature. Certain types of insulation don’t last as long as their alternatives, which could be the reason why basement temperatures are different from temperatures on the first floor, or why your kitchen is cold and your living room isn’t.

Use Good Thermostats And Zoning

One very effective way to eliminate hot and cold spots is through zoning. This allows you to raise or lower temperatures in a specific area. This will allow everyone to enjoy an environment that balanced to suit individual needs. Speak with an HVAC company about your options in zoning. Make sure to ask about ductless, mini-split HVAC systems. You should additionally install a smart thermostat that can help automate adjustments in temperature.

Schedule Regular HVAC Maintenance

A lot of homeowners make the mistake of ignoring HVAC maintenance until their home heating and cooling equipment starts malfunctioning. Have your system inspected once each year to identify possible problems early on so that they can be resolved.

image of a furnace hvac filter replacement

Clean Your HVAC Air Filters

If your home feels much colder than the thermostat reading implies, or if there are warm spots in spaces that are supposed to be cool, then your HVAC system might not have enough airflow. One very common cause of insufficient airflow is a dirty, clogged filter. Check your filters once each month and then replace or clean them as necessary. Clean air filters will help regulate indoor temperatures and they’ll also limit the number of pollutants being circulated throughout your home.

Install Proper Window Coverings

The easiest and least expensive way to get rid of hot and cold spots is by using window treatments. Blinds and curtains help moderate the amount of sunlight that enters the living space. As such, your HVAC system won’t have to work harder than it’s meant to create and maintain a comfortable indoor environment.

Tower Energy Can Handle All Of Your HVAC Needs

Tower Energy Logo
Eliminating hot and cold spots throughout your home does not have to be a frustrating and overly complex task. More often than not, the underlying cause of these issues isn’t as serious as many people believe. Just a few simple steps can be all that it takes to resolve this common problem. Maintaining a good indoor air balance, particularly when it comes to temperature, airflow, and direction, will ensure consistent temperatures and ongoing comfort for all residents.

Tower Energy has a long-standing reputation for providing superior HVAC services throughout the area. Our technicians are all NATE-certified and can offer truly remarkable HVAC installations, repairs, tune-ups, and full system replacements. Furthermore, our techs have ample knowledge and industry experience for meeting your HVAC needs perfectly. Our team is also able to identify the right home comfort solutions for your living environment.

When you hire Tower Energy, you can be sure that you’re in excellent hands. Our HVAC service costs are the most competitive in the region, and our work is always backed with a solid guarantee. When we provide you with one of our heating and cooling services, our top priorities are always helping our customers maintain high levels of energy efficiency, optimum indoor air qualities, and undeniable comfort. To schedule a home visit, call our office now and receive a free, in-home estimate.

Contact us now or call us at (860) 677-7347 to find out more.

energy tips for homeownersKeeping your home safe and comfortable is Tower Energy’s top priority. Not only do we want to make your home is safe and comfortable, but we want our entire Hartford County, CT community to be safe. One way that Tower Energy and Plainville Oil, a Tower Energy company, are working to do this is by helping local residents to use less energy. Consequently, reducing energy consumption also allows us to save money. Be sure to schedule your annual heating system tune-up and air conditioning maintenance. Annual HVAC maintenance is a great way to lower home energy costs. In this article, we discuss other ways you can conserve energy and lower related costs.

Upgrade Your HVAC Equipment To Conserve Energy For Your Connecticut Home

The easiest way to lower your carbon footprint and your greenhouse gas emissions is to improve the efficiency of your home comfort systems. When necessary, you can upgrade to new heating and cooling equipment.

Today’s heating and cooling systems can reduce energy consumption by up to 30% or more. When you upgrade, you burn a lot less fuel – so you not only save money, you decrease your emissions and lessen demand for foreign energy sources.

Choosing Bioheat® For Your Heating Fuel

Bioheat® heating oilOil heat is becoming cleaner each year. This aspect makes the use of heating your home with heating oil very appealing. For example, the industry contributes to alternative solutions like Bioheat®. These types of home heating fuels combine renewable elements with already-clean home heating oil to promote a fuel for the future.

As a greener fuel option, Bioheat is becoming more widely used by dealers throughout New York and nationwide. Biofuel options like Bioheat significantly reduce sulfur oxide, carcinogens, and carbon dioxide to better protect your family and the environment.

At Tower Energy, we offer our customers the option to use Bioheat® as their fuel source. Call Tower Energy today to find out more information about using Bioheat® for your home. We will gladly take the time to answer all of your questions. Call now!

Conservation Tips for All Seasons In Connecticut

No matter what the season, we have lots of easy tips to help you lower your energy costs. Some of these tips don’t even require spending a single penny! For more conservation advice tailored to your individual comfort needs, please contact us. We can find practical energy solutions for your home to help you lower your energy costs.

Warm Weather Tips To Reduce Home Cooling Costs

summer energy conservationNo one wants to pay more than they have to for their home cooling costs. However, sacrificing comfort is not an option. Below, you will find some useful tips to prevent astronomical energy costs while staying nice and cool inside your home.

Cold Weather Tips To Reduce Home Heating Expenses

winter energy conservationThe weather here in Connecticut can reach extremes. The winter is notorious for being cold and frigid. Therefore, you need a reliable heating system to keep your home nice and cozy. However, you can feel comfortable in your own home without paying a fortune. Below are some energy tips that you can use to keep your home heating costs down during the winter.

Tips To Conserve Energy Throughout The Year

energy efficiencyBelow, you will find some tips that can make your home more energy efficient overall. These tips can help save energy, and money, in every season.

Call Tower Energy For All Of Your Home Comfort Needs

Tower Energy is a reputable HVAC company that specializes in heating and cooling installations, tune-ups, repairs, and more. We also offer fuel deliveries including propane and heating oil. Our goal is to deliver superior services at affordable costs to ensure our customer’s satisfaction. As a company that recognizes the financial pressures that families face today, we vow to continually look for ways to help our customers save while receiving the best products and services available.

All of our HVAC technicians are NATE certified and have ample experience with all makes and models of heating and cooling equipment. They can find the best solutions to enhance the energy efficiency of your home while improving your comfort and indoor air quality. We offer free, in-home estimates, so give Tower Energy a call today!

Likewise, we offer our clients high-quality home heating oil and the best heating oil prices. All of our fuel deliveries are fast and reliable. Be sure to contact us to find out more about our delivery plans, financing options, and unbeatable fuel prices. Call now!

Contact us now or call us at (860) 677-7347 to find out more.